Front 5000 Series T3 Brake Ring
DBA53910.1S

Diameter (mm): 356
Axle: Front
Per Car Qty Required: 2

5000 SERIES T3 is the ultimate in direct replacement 2 piece performance brake rotors Featuring all the benefits of the 5000 Series along with DBAs patented world renowned T3 bi directional slot design.

Built on the foundations of DBAs T2 slot, the T3 slot design features additional precise CNC machined tri symmetrical slots, resulting in an even quieter, more responsive and smoother braking experience. The T3 slot increases the number of exit points for brake pad friction dust and gases to escape through, further increasing the consistency and effectiveness of every brake stop.

DBA recommends a T3 slot for high performance applications.


Technical Specs

Product SubVariantT3
AxleFront
Vane DesignKP Vents
Outer diameter[mm]356
Height [mm]30
Brake Disc Thickness [mm]30
Minimum Thickness [mm]27
Centering Diameter [mm]177
Number of Holes12
Weight [kg]9.89
Pitch Circle Ø196
UomEach
Surface DesignSlotted

Package Specs

No. of items in box1
Packaged Height (cm)40
Packaged Length (cm)4.8
Packaged Depth (cm)39
Packaged Weight (kg)9.89

General Specs

SKUDBA53910.1S
Barcode9316391443465
Short Description5000 Series T3 Brake Ring
BrandDBA
Product SegmentRotors & Drums
Product CategoryBrake Rotor
Product Variant5000 Series
Warranty12 months/ 20,000km/ 12,000 miles

Product Info

Sharing all the benefits of the 4000 SERIES, 5000 SERIES rotors are a composite 2 piece direct replacement brake rotor. We use only the highest quality materials to ensure optimal performance under the most strenuous circumstances, combining high carbon cast iron rings with aerospace grade aluminium hats (T6061-T6) held together with National Aerospace Standards (NAS) bolts and crimp nuts.

5000 SERIES shares all of the performance technology featured in the 4000 SERIES, with the added benefits of further weight reduction and improved heat management via the aluminium hats.

The use of aerospace grade aluminium hats reduces the unsprung weight of the brake rotors, whilst allowing for uniform radial disc expansion throughout the cast iron rings and reduced heat transfer from disc to hub via the aluminium hats.

We offer both complete assemblies for first time replacement (hats and flat discs bolted together) along with replacement hats and flat disc rotors. This allows drivers to re use their DBA 5000 SERIES hats with DBA replacement flat discs (rings).

We recommend 5000 SERIES for high performance street vehicles, track day and club racing, rally applications and show vehicles.

DBAs patented T3 slot design is the ultimate in braking technology, further building on the benefits of DBAs high performing T2 slot design.

Revolutionary bi-directional slot design
Improved 3 way slot design
Increased number of out-gassing exit points
Effective removal of brake dust and debris.
Effective in maintaining consistent friction.

The T3 slot design further increases the number of out-gassing exit points on the rotor surface, and assists in the removal of unwanted dust and debris between the rotor and brake pad, which otherwise could cause pad glazing and loss of brake performance.

The development of the revolutionary bi-directional slot design eliminates the concern of having opposing left and right designated brake rotors, with DBA T2 and T3 rotors able to be used on either side of your vehicle.

The bi-directional slot design also assists in dampening the vibration harmonics (noise), resulting in a quieter, more responsive and smoother brake pedal feel.

Features

  1. Two Piece Design Hat and rings sold as complete assemblies and as individual components, for more economical replacement options.
  2. Surface Design Symmetrical slots facilitate the exit of friction dust and gasses, for a quieter and more responsive pedal feel. *
  3. DBA Aluma-Lite Aluma-lite centre hat / bell made from extra lightweight 6061 T6 aircraft aluminium, reducing the unsprung weight for better vehicle handling and minimising heat transfer to the wheel hubs.
  4. Anti Rust Painted non-friction areas to prevent rust and enhance appearance.
  5. Bi-Directional Use Symmetrical slotting and/or drilling for universal left/right use.
  6. Thermal Stability Profiling (TSP) Heat treatment cycles realign the microstructure of the iron, resulting in increased rotor stability and durability. Centre split core castings for increased heat transfer and thermal efficiency.
  7. Thermal Efficiency Centre-split core castings for increased heat dissipation and thermal efficiency.*
  8. CBN Cubic Boron Nitride machine turned finish, minimising disc thickness variation and the potential for pad “knock” and resulting premature wear.
  9. Thermographic Heat Paint (TGHP) Paint markings change colour at specific temperature thresholds to assist with the monitoring of braking temperatures and rotor fatigue.
  10. High Carbon Alloyed Iron Formulation allows for optimal interaction with DBA’s thermal stability profiling. Increases the capacity of the rotor to handle constant and extreme heat over prolonged periods.
  11. Kangaroo Paw Unique Kangaroo Paw vein design for up to 20% better heat dissipation, increasing braking effectiveness and prolonging brake life.*
  12. NAS Bolts & Nuts National Aerospace Standards (NAS) bolts and crimp nuts for maximum strength at minimal weight.

    *Some variants may not contain all features

Installation Videos


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.